ZT0922CMD Aviation Blind Rivet Installation Tools-W/Digital Module
Features
- The ZT0922CM is an air hydraulic tool designed especially for installation of CherryMAX® and nut plate rivets.
- This tool utilizes straight, offset and right angle pulling heads, all of which can install -4, -5 and -6 diameter CherryMAX® bulb type rivets in all head styles, materials and grip lengths
- Features with the most advanced patented digital module to enable operators know the rivet tool setting capacity instantly under various air supply condition and the rivet setting cycles performed during their working period.( Optional, model with ” D” means with digital module )
- It will also remind operators when to do service or maintenance to the tool in proper interval.
- It will help to cease the controversy about warranty issue especially if the tool has been misused or abused with abnormal high air pressure which exceeds the design specification.
- Built with patented “Module units assembled in composite clam shell housing” for the ease of tool service.
- Patented “Broken mandrel vacuum collection system” for the cleanliness and safety of work area.
- Forged and heat treated aluminum alloy made Hydraulic Section for the best rigidity.
- Swivel air inlet design for maneuverability works.
CherryMAX® is the registered trademark of Cherry Aerospace LLC.
CherryMAX® Straight Pulling Heads
H701B-456
Install: 1/8″, 5/32″ & 3/16″ Nominal & Oversize CherryMAX Rivets
CherryMAX® Compact Single Jaw Offset Pulling Heads
H781B-456
Stroke: 3/4″
Weight: 0.5(0.23) lbs(kgs)
CherryMAX® Right Angle Pulling Heads
H753A-456
Install: 1/8″, 5/32″ & 3/16″ Nominal & Oversize CherryMAX Rivets
Standard setup for 1M length
Standard setup for 3M length
Specification:
- Traction Power: 2000(920) Ibf(kgf)
- Stroke Length: 7/8(22) inch(mm)
- Net Weight: 4.2(1.9) Ibs(kgs)
- Nosepieces Equipped: Pulling head need to purchase separately.
- Max. Capacity: Max. 3/16″(4.8mm) structural rivets in all materials
DO NOT apply air pressure over 110 psi / 7.5 bar to these tools.
*Please refer to the blind rivet specification to ensure the tensile strength is lower than the traction power of the model you select.
*Below specification are measured with 1 meter length, 1/8″ I.D hydraulic hose
Model | Traction Power lbf(kgf) | Stroke Length inch(mm) | Net Weight lbs(kgs) | Nosepieces Equipped inch(mm) | Max. Capacity |
ZT0922CM | 2000(920) | 7/8(22) | 4.2(1.9) | Pulling head need to purchase separately. | Max. 3/16″ (4.8mm) CherryMax Rivet |
ZT0922CMD | 2000(920) | 7/8(22) | 4.2(1.9) | ||
ZT1218CM | 2523(1150) | 23/32(18) | 4.2(1.9) | ||
ZT1218CMD | 2523(1150) | 23/32(18) | 4.2(1.9) | ||
ZT0920SCM-1 | 2000(920) | 51/64(20) | 2.2(1) handle ass’y | ||
ZT0920SCM-3 | 2000(920) | 51/64(20) | 2.2(1) handle ass’y |
*Operating Air Pressure: 90PSI/6.2bar *Air Inlet Size: 1/4 inch-NPT/PT *Min. Hose Size: 3/8″(10mm)