ZT1914CMD Aviation Lock Bolt & Blind Bolt Installation Tools/Digital Module
Features
- The ZT1914CM is an air hydraulic Lock Bolt & Blind Bolt tool designed especially for installation of CherryMax® Lock Bolt & Blind Bolts.
- This tool utilizes straight, offset and right angle pulling heads, all of which can install -4, -5, -6 & -8 diameter CherryMax® Lock Bolt & Blind Bolt in all head styles, materials and grip lengths. ( -8 diameter in Aluminum only )
- Features with the most advanced patented digital module to enable operators know the rivet tool setting capacity instantly under various air supply condition and the rivet setting cycles performed during their working period.( Optional, model with “D” means with digital module )
- It will also remind operators when to do service or maintenance to the tool in proper interval.Â
- It will help to cease the controversy about warranty issue especially if the tool has been misused or abused with abnormal high air pressure which exceeds the design specification.
- Built with patented “Module units assembled in composite clam shell housing” for the ease of tool service.
Forged and heat treated aluminum alloy made Hydraulic Section for the best rigidity. - Swivel air inlet design for maneuverability works.
Standard setup for 1M length
Standard setup for 3M length
Specification:
- Traction Power: 4200(1900) Ibf(kgf)
- Stroke Length: 9/16(14) inch(mm)
- Net Weight without nose assembly: 5.7(2.6) Ibs(kgs) handle ass’y
- Max. Capacity: -4, -5, -6 & -8 diameter CherryMax® Lock Bolt & Blind Bolt in all head styles, materials and grip lengths. ( -8 diameter in Aluminum only)
- Operating Air Pressure: 90(6.2) PSI(bar)
- Air Inlet Size: 1/4 inch-NPT/PT
- Min. Hose Size: 3/8(10) inch(mm)
DO NOT apply air pressure over 110 psi / 7.5 bar to these tools.
*Please refer to the blind rivet specification to ensure the tensile strength is lower than the traction power of the model you select.
*Below specification are measured with 1 meter length, 1/8″ I.D hydraulic hose
| Model | Traction Power lbf(kgf) | Stroke Length inch(mm) | Net Weight without nose assembly lbs(kgs) | Max. Capacity |
| ZT1914CM | 4200(1900) | 9/16(14) | 5.7(2.6) | -4, -5, -6 & -8 diameter CherryMax® Lock Bolt & Blind Bolt in all head styles, materials and grip lengths. ( -8 diameter in Aluminum only) |
| ZT1914CMD | 4200(1900) | 9/16(14) | 5.7(2.6) | |
| ZT1912CM-1 | 4200(1900) | 31/64(12) | 2.75(1.25) | |
| ZT1912CM-3 | 4200(1900) | 31/64(12) | 2.75(1.25) |
*Operating Air Pressure: 90PSI/6.2bar *Air Inlet Size: 1/4 inch-NPT/PT *Min. Hose Size: 3/8″(10mm)
PULLING HEADS AVAILABLE FOR THE ZT1914CM & ZT1912CM INSTALLATION TOOLS
Pulling heads are not furnished with riveter and must be ordered separately.
H84A-8 Straight Pulling Head
H1900-456 Straight Pulling Head
H513SRC-06-35 Straight Pulling Head
H84B-568 Straight Pulling Head
H563-4B, H563-5B, H563-6B Offset Pulling Head
H562-6B, H562-8B Offset Pulling Head
H856-6MBÂ Offset Pulling Head
H829-56MBPS Right Angle Pulling Head
CherryMax® is the registered trademark of Cherry Aerospace LLC.
| Fastener Type | Pulling Head Type | Tool Part Number | Adaptor | Diameter | |
| MAXIBOLT® | MAXIBOLT® S TYPE | MAXIBOLT® U TYPE | |||
| Straight | H83B-5MB | H83B-5MBU | None | -05 | |
| H83B-6MB | H83B-6MBU | None | -06 | ||
| H84A-8MB | H84A-8MBU | Yes | -08 | ||
| Offset | H856-6MB | H856-6MB+856-003 | None | -06 | |
| Right Angle | H829-5MB | H829-5MBU | None | -05 | |
| H829-6MB | H829-6MBU | None | -06 | ||
| H829-8MB | H829-8MBU | None | -08 | ||
| Lockbolt | Straight | H513, H513S, H513SR | None | -4, -5, -6, -8 | |
| Offset | H563-4B/5B/6B | None | -4, -5,-6 | ||
| H562-6B/8B | Yes | -6, -8 | |||
| MAXIBOLT PLUS® | Straight | H84B-568* | None | -5, -6, -8 | |
| Right Angle | H829-56MBPS | None | -5, -6 | ||
| NAS1919/1921 | Straight | H1900-456 | None | -4, -5, -6 | |
| CherryMAX® | Straight | H84A-8 | None | -8 | |
| Right Angle | H829-8 | None | -5, -6, -8 | ||
| CherryMAX® ‘AB’ CherryLOCK® “A” | Straight | H84-8CLA | None | -8 | |
